Mobil Delvac 1 SHC 5W-40(Available 20L, 208L)




Mobil Delvac 1 SHC 5W-40 Synthetic Diesel Engine Oil

Mobil Delvac 1 SHC 5W-40 is a very high performance, synthetic diesel engine oil that provides excellent lubrication including long drain capability, helping towards long engine life for diesel engines operating in severe applications. The advanced technology behind this product delivers exceptional performance in turbo-charged as well as older naturally aspirated engines. Mobil Delvac 1 SHC 5W-40 is recommended for use in a wide range of heavy-duty applications and operating environments found in trucking, mining, construction, agriculture and marine.

Mobil Delvac 1 SHC 5W-40 is recommended for use in super high performance diesel applications including turbo-charged and naturally aspirated engines designs.


Modern high output diesel engines run hotter than older engines which significantly increases the demands on engine lubricants. Current tighter engine designs reduce oil consumption, resulting in less fresh oil makeup to replenish depleted additives. Top piston rings are located higher bringing the oil film closer to the combustion chamber where temperatures increase thermal stress on the lubricant. Mobil Delvac 1 SHC 5W-40 helps to protect the engine under severe operating conditions. It is also fully compatible with conventional mineral oils. The key benefits include:

  • Excellent thermal and oxidation stability – Control of low temperature sludge build-up and high temperature varnish deposits
  • High TBN – Helps towards extended drain intervals with high sulphur fuels
  • Advanced formulation and viscometrics – Maintains viscosity in severe, high temperature service
  • Excellent low temperature pumpability – Easier engine start-up and reduced wear
  • Good resistance to corrosion – Helps towards long life of critical wear surfaces
  • Long drain capability – Helps towards good operating efficiency and lower overall cost
  • Component compatibility – Long gasket and seal life, extended service intervals
  • Low volatility, excellent wear and bore polishing control – Good oil consumption control


Mobil Delvac 1 SHC 5W-40 meets or exceeds the requirements of:

  • ACEA E4

Mobil Delvac 1 SHC 5W-40 has the following builder approvals:

  • MB-Approval 228.5
  • MAN M 3277
  • MTU Oil Category 3

Mobil Delvac 1 SHC 5W-40 is recommended by ExxonMobil for use in applications requiring:

  • Volvo VDS-2

Additional information

Weight 16.00000000 kg

20 Litre, 208 Litre