LUBRIGUARD 10 is a solvent deposited water displacing corrosion preventative.
LUBRIGUARD 10 is a blend of de-watering agents, corrosion inhibitors, hydrocarbon mineral oils, synthetic sulphonates and hydrocarbon solvents. It offers short term protection of ferrous and aluminium alloy components. It leaves a light oily anti corrosion film when applied. It is ideally suited to inter-process protection after machining
Excellent dewatering properties
LUBRIGUARD 10 is best applied by dipping, spraying or brushing. If a tank is being used the residual water should be drained off periodically. Allow up to 50 minutes drying time. It may affect some rubbers and plastics on long-term exposure.
|Protection Indoors||3-6 months|
|Protection Outdoors||1 month|
|Protection Outdoors covered||2 months|
|Covering capacity||60 sq.mtrs. / ltr|
Typical Test Data:
|SG @ 15.6°C||0.830|
|KV @ 40°C (cSt)||2.94|
|Film type||Thin oily|